Administration buildings which are usually built permanently by various institution and enterprises and office buildings taking place in construction site mobilization are in this category. The number of staff, buildings’ lifetime, and list of requirements are the most important criteria for determining the needs in the project design process of light steel office buildings. Providing technical specifications suitable to weather conditions and all kinds of comfort within the office is very important for the performance of the staff in the office buildings.
Special solution offers are presented by our technical staff comprising of architects and engineers in the event there are particular customer requirements and demands. Static calculations are made for each building by taking snow and rain loads proper to the climate conditions of the place where they will be mounted as a basis.
Two methods are proposed in the production and assembly stages of houses we create with light steel technology.
1. Light Steel Panel System
2. Plated on Site Light Steel System
In the event Light Steel Panel System application is preferred, the assembly of the panels in the size of 1250×2500/3000 mm. comprising of steel carcass, the insulation application inside the carcass, and the interior and exterior facing material of the carcass are carried out at the factory. Panel thickness differs between 80-30mm. It is possible to make storey height of 3000 mm., 3500 mm if requested. These panels are consigned to the site in ready form. Connecting the panels and other following applications are performed on-site. This is a time-saving method. A-1 class incombustible fiber cement or painted galvanized sheet application can be performed on the interiors and exteriors of the building. All installations are designed optionally as flush mounted or surface mounted.
In the event Plated on-site Light Steel System application is preferred, the carcasses prepared in compliance with static calculations of the project are consigned to the site in their bare form. The first steel carcass assembly is completed at the site. Afterward insulation application, interior, and exterior facings are performed. All of the humidity barriers and such-like applications are completed at the site. Elegant facade applications are performed with A-1 class incombustible fiber cement on the exteriors of the buildings. All installations are designed and applied as flush-mounted.